HPE P23666-B21 100GbE HDR100 ConnectX-6 CX653106A QSFP56 2P PCI-e4 x16 Ethernet or InfiniBand Network Adapter NIC.

HPESKU: 107108794

Price:
Sale price$774.00

Description

We can integrate this in a full solution, please contact us
Please note: this adapter needs to be connected to Gen4 PCI-e x16 slot to have 100Gb/s rates on both ports
Comes with Full Height and Low Profile brackets

LOC: OFC-ST-R8-S2


Manufacturer specifications:

MCX653106A-ECAT Specifications

Please make sure to install the ConnectX-6 card in a PCI-e slot that is capable of supplying the required power and airflow as stated in the below table.


Physical

Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)

Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)

Protocol Support

InfiniBand: IBTA v1.4a

Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane) port

Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR

Data Rate

InfiniBand

SDR/DDR/QDR/FDR/EDR

Ethernet

1/10/25/40/50/100 Gb/s

Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes (2.0 and 1.1 compatible)

Adapter Card Power

Voltage: 12V, 3.3VAUX

Power

Cable

Typical Powerb

Passive Cables

21.0W

Maximum Power

Please refer to ConnectX-6 VPI Power Specifications (requires NVONline login credentials)

Voltage: 3.3Aux
Maximum current: 100mA

Maximum power available through QSFP56 port: 5W

Environmental

Temperature

Operational

0°C to 55°C

Non-operational

-40°C to 70°C

Humidity: 90% relative humidityc



Airflow (LFM) /
Ambient Temperature



Cable Type

Airflow Direction

Heatsink to Port

Port to Heatsink

Passive Cables

350 LFM / 55°C

250 LFM / 35°C

NVIDIA Active 2.7W Cables

550 LFM / 55°C

250 LFM / 35°C

Regulatory

Safety: CB / cTUVus / CE

EMC: CE / FCC / VCCI / ICES / RCM / KC

RoHS: RoHS Compliant

Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.

c. For both operational and non-operational states. 

Policy

The above information was obtained from open sources, including official websites and manufacturers' catalogs.

When placing an order, please pay attention to the parameters and characteristics of the purchased product that are important to you.

The image may not exactly match the actual product.

In case of discrepancies in the product description, you can contact our support team for advice and assistance.

All materials published in this catalog are the property of Advanced Data Devices, LLC, any publication or copying (full or partial) without prior consent is prohibited.

You may also like

Recently viewed