Description
This listing is for one HPE ProLiant DL360/DL560 Gen11 High Performance Heat Sink Kit
MPN:
P48905-B21, P48905B21, P53220-001
Notes/Requirements
DL360:
− Quantity of Processor and Quantity of Heatsink must match
− If Processor Wattage is more than 185W and less than or equal to 270W, then "Performance Heatsink" and "Performance Fan" must be selected.
− In 300W processor one socket configuration, the air cooling with Performance Heatsinks & Performance Fan Kits can be supported. Field upgrade to two socket is not supported with air cooling solution. If Performance Heatsink is selected, then Standard fan cannot be selected, and Performance Fan Kit must be selected
− For processors below 185W TDP, customers are able to configure with High Performance Heatsinks &
Performnace Fan Kit in HPE OCA. First, deselect the Standard Heatsink and
Standard Fan, then reselect High Performance Heatsink and Performance Fan Kit.
− If Closed-loop Liquid Cooling HeatSink or DLC module is selected, then "High Perf Heat Sink" cannot be selected.
− If Performance Heatsink or DLC Module is selected, then Performance Fan must be selected and vice versa.
− If NVMe/ SAS4 is selected, then Performance Heatsink or Closed Loop Liquid cooling Heatsink or DLC
Module must be selected.
− If Closed Loop Liquid Cooling is selected with 256GB DIMM or Internal NS204i-u or rear NS204i-u, then Maximum EDSFF drive limit will be reduced from 20 to 10.
− If Networking/ InfiniBand that is 100G or more, then Performance Heatsink or Closed Loop Liquid cooling Heatsink or DLC Module must be selected.
− If 256GB DIMM is selected, then Performance Heatsink or Closed Loop Liquid cooling or DLC Module must be selected.
− If NS204i-u is selected, then Performance Heatsink or Closed Loop Liquid cooling or DLC Module must be selected.
DL560:
− For 4P Air cooling configuration:
− Air cooling can’t be upgraded to Liquid cooling, please choose Liquid cooling CTO at step 1 as needed.
Please contact us with any questions
Thank you
LOC: OFC-ST-R11-S6
Policy
The above information was obtained from open sources, including official websites and manufacturers' catalogs.
When placing an order, please pay attention to the parameters and characteristics of the purchased product that are important to you.
The image may not exactly match the actual product.
In case of discrepancies in the product description, you can contact our support team for advice and assistance.
All materials published in this catalog are the property of Advanced Data Devices, LLC, any publication or copying (full or partial) without prior consent is prohibited.